SGI Rackable C1000 User's Guide download pdf (Page 13)

4 007-5716-001

1: Overview

Table 1-1 describes the various components illustrated in Figure 1-1.

Table 1-1 Front Panel Components

Component Description

LED indicator lights These LEDs provide you with critical information related

to different parts of the system.

Green (PWR): The LED farthest to the left indicates that

power is applied to the server and the system is on. When

the LED is off, the system is off, even if the AC power cord

is plugged into the server.

Blue (HDD): The LED in the middle indicates that the

hard drive(s) are currently being accessed and activity is

occurring.

Red/Tri-color (ID2): The LED to the far right may have

several functions depending on the configuration of your

server. If your server was purchased with the Roamer

remote management module, then this LED can be turned

on or set to blink via Roamer so that a technician can easily

identify a unit that may need service.

Power button This single-push, push button is a power on/off button.

When the system is in an off state, pushing the button once

powers the system on. When the system is in an on state,

pushing and releasing the button power the system off.

This button does not have a reset function.

Serial Connector This port is accessed with an RJ-45 connector. When the

Roamer remote management module is installed, this port

functions as an interface to the module. When the Roamer

remote management module is not installed, the pinout for

the serial connector is as shown in Table 1-2.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 29 30

No comments

SGI Rackable C1000 User's Guide Page 13