42
Chapter 2: Installing and Removing the CPU and Memory
Removing the System Module
Figure 2-5 Removing the System Module Screws
Warning:
The heat sinks on the CPU and system module become very hot. Wait 5
minutes after powering off the OCTANE workstation before you remove the system
module. Test before touching the CPU or heat sinks.
1. To remove the system module, you need to power off the system, wait 5 minutes
after powering off the workstation to allow the heat sinks to cool, and attach the
wrist strap. If you have not already done so, go to “Preparing the Workstation to
Remove and Install a CPU and Memory” and follow the instructions through
attaching the wrist strap. Then return here and follow the instructions.
For illustration purposes, the optional PCI module is shown installed.
urenrjrjkvnm